So let's say you have all of your letters complete-- now what? It took me weeks to get up the nerve to put a hole in the wall and start hanging! Let's hope that the same doesn't happen to you!
Now that we are putting it all together, flip over your letters and give them a good inspection. How many hangers do you already have on the letters and how many do you need to buy? I went to Home Depot and bought a picture hanging kit. The kit had some heavy duty hooks and some light weight options. I used both, depending on what I was hanging. I used the heavy duty hooks on the button-covered "O" and the fabric-heavy "G". The light weight were great for the letters I created from cardboard, the letters with chipboard bases, things like that. I super glued the hooks on the backs of the letter so that I could have a flush attachment (and I didn't have to worry about splitting wood, etc.).
Start by measuring the wall where you would like to hang your letters. In my case, I had a whole wall in my daughter's room to play with. Next, I measured that same amount of space on my floor. Take the letters and lay them out. Consider a few different elements-- spacing (letter to letter and line to line), color story (are there too many of one theme/color together), and if you want the alphabet to read in a logical way (does your eye travel along the line or does it look everywhere at once).
Once you have your letters laid out, you should start translating that to the wall. I started in the upper left corner with the letter A. Put a dab of toothpaste on the hanger hook and press the letter up against the wall. This will easily mark where you need to place your nails. Every so often, you will want to stand back and make sure the spacing you had laid out is what is coming up on the wall as well.
No comments:
Post a Comment